Fuji

Weight Transmitters
  Overview
The A200E is a weight amplifier indicator based on a microcontroller. All the operations of configuration and weight calibration are done by front keyboard. The instrument is equipped with a main display to show weight and an auxiliary display to show the operator guide messages.
The base version foresees three digital inputs, three digital outputs and two serial line outputs a primary bi-directional line and an auxiliary one with transmission only.
The primary is available in RS232 or in RS485 mode to operate in multidrop network. ADOS has implemented as standard both the logic protocol MODBUS and PROFIBUS-DP by the gateway IPBUS1 (option). Options allow to expand the number of digital outputs from three to eleven ( S and D versions) and with options V or A it is possible to have an analog optoisolated output configured for 0-10 V or 4-20 mA.
The A200E is equipped with a real time clock that allows to include date and time on printing reports. According to several applications,
ADOS supply software versions for multicomponents batching and/or complex weighing process systems.
     
Technical Data  
  • Display graduations
    Display increments
    Decimal point selectable
    Input sensitivity
    Measuring range
    Accuracy
    Linearity
    Thermal drift
    Max number of load cells
    Load cell excitation voltage
    Load cell connection
    Measuring rate (without filter)
    A/D/A/D converter
    FIR digital filters
    Main supply
    Power comsumption
    Nominal temperature range
    Storage temperature range
    Main display
    Digits height main display
    Alphanumeric aux display
    Keyboard
    Main serial output
    Aux serial output
    Baud rate
    Transmission protocols
    Digital imputs
    Digital output
    Contacts rating
    Optional digital outputs (versions S-D)

    Optional analogue output (16 bit optoisolated)
    4-20mA load resistance
    0-10V load resistance
    Housing
    Environmental protection (front panel)
    Dimensions
    Panel cut out
    /Weight    		 Max 10000
    1 - 2 - 5 - 10 - 20 - 50
    0 - 0.0 - 0.00 - 0.000 - 0.0000
    0.4
    -0.5..2.5
    0.01
    0.01
    0.005
    8 x 350 ohm
    8
    4 wire (6 option)
    56
    Sigma Delta 24 bit (16.777.216)
    5 low-pass (selectables)
    230 - 50..60 Hz (standard)
    10
    -10..+40
    -20..+70
    5 digit red LED
    14
    8 digits green LED
    16 keys
    RS232 – RS485
    RS232 (TX only)
    Main 200–2400–4800–9600-1200
    MODBUS-RTU, ASCII-ADOS
    3 internal powered
    3 relays (SPST)
    0.5 A @ 24 Vcc/0.5 A @ 24 Vdc
    8 relè 0.5 A @ 24 Vcc/8 relays 10.5 A @ 24 Vdc (SPST)
    4-20 mA or 0-10 V

    Max 500 ohm
    Min 10 Kohm
    Aluminium
    IP 44
    192 x 140 x 96 (L x D x H)
    188 x 91
    1.5