 |
||
Camera Systems for klins and furnaces |
||
 |
Overview | |
| The Quadtek Spyrometer3 with its patented combination of a color video camera and a scanning pyrometer gives the operator the ability to see process conditions while measuring the temperature of virtually any area in the field of view. The M553 model is designed specifically for lower temperature environments of 427°C-1371°C (800°F-2500°F). It is an ideal aid in controlling clinker coolers, steel reheat furnaces, non-ferrous blast furnaces, casting wheels and strip casting machines. The imaging pyrometer takes the video image and the temperature information, multiplexes it and sends it, via a single coaxial cable, to the image processor in the control room and displays it on a VGA monitor. On-screen temperature data is also accessible through 4-20mA outputs, which can easily be interfaced to your control system. |
||
| Technical Specification | ||
| Pyrometer Sensor Temperature Range ................ 800°-2500° F (427°-1371° C) Temperature Accuracy ............ 1.0% Full scale Measurement Technique ........ Single wavelength pyrometry Spectral Regions .................... Narrow band centered at 1.6 microns Spot Size ................................. 1/24 of the horizontal width of the image Spatial Scan Resolution ......... 47 horizontal x 35 vertical width of the image Scan Rate ............................... Scan speed varies with size & number of TMZs or via operator adjustment Lens Construction ........................... Air or water-cooled 304 stainless steel outer shroud. Sapphire window for max. environmental protection Type ......................................... 45° offset lens Length (L) ................................/OAL30W553 27.7" (694mm) For details on our full range of Spyrometer lenses, please contact your sales representative. Field of View ........................... Wide - 75° H x 58° V; Medium - 50° H x 38° V; Narrow - 35° H x 26° V Diameter ................................. /L: 1.5" (38mm); /OAL: 2.0" (51mm); /WCL: 2.5" (63mm) Cooling Requirements ............ Instrument quality air, 25-40 SCFM (12-19 dm3/sec) @ 5-15 psig (34-103kPa) required for straight view lens Thermocouple ......................... /TJ: Type J thermocouple option; /TK: Type K thermocouple option Camera Power ...................................... 115-230 VAC, 50/60 Hz Camera Detector .................... Solid state color image sensor System Resolution .................. 300 lines minimum throughout the image Video ....................................... 1.0V p-p, 75ohm, CCTV signal /VTN: NTSC or /VTP: PAL video timing selected at time of order Control .................................... Iris adjustment on rear of camera; remote iris adjustment from the processor Application Filter .................... Filters are provided to match your process and maximize performance. Contact your Sales Representative Enclosure Construction ........................... /CEI: Corrosion-resistant, insulated, aircooled, NEMA 4; /CEW: Corrosionresistant, water-cooled, NEMA 4 Cooling Type ........................... Vortex cabinet cooler, 25 SCFM @ 100 psi (13 dm3/sec @ 690 kPa); instrument-quality air required or water cooled option available Ambient Environment ............. Max. 140°F (60°C) with negligible radiant heat load. Water cooled option available to handle high radiant heat environment Mechanical Video Output Jack .................. Female PL-259 “UHF” type Power Input Jack .................... Removable waterproof miniplug (JOY type TP, female 3-conductor; mating power cord provided) Enclosure Cooling Input .......... 1/4" brass quick-disconnect nipple; mating coupler (Snaptite BVHC4-4F) provided Lens Cooling Input .................. 1/2" brass quick-disconnect nipple; mating coupler (Snaptite BVHC8-8F) provided Weight .................................... 30 pounds (14kg) for standard air-cooled configuration (lens and camera) |
||
